Sensor-CASSY, 3 HU

524013K

Interface device for recording measurement data

For connection to the USB-port of a computer
3-fold electrical isolation (4-mm-inputs A and B, relay R)
Measurement possible parallel at 4-mm-inputs and sensor box connector sites (4 channels)
Up to 8 analog inputs per Sensor-CASSY retrofittable using sensor boxes
Automatic sensor box detection (plug and play) by CASSY Lab 2 (524 220)
Microprocessor-controlled with CASSY operating system (easily updatable via software for function enhancements)
Developer Information and LabVIEW^TM driver available through our internet homepage
Assembled in a 3 HU module to be integrated into a power supply channel. The USB socket is located at the front side.

Technical data

5 Analog inputs
2 Analog voltage inputs A and B on 4-mm safety sockets (electrically isolated)
Resolution: 12 bits
Measuring ranges: ± 0.1/0.3/1/3/10/30/100/250 V
Measurement error: ± 1 % plus 0.5 % of range end value
Input resistance: 1 MΩ
Scanning rate: up to 1 MHz per input
Amount of measured values: nearly unlimited (dependent on PC) up to 10,000 values/s, at higher measuring rate max. 200,000 values
Pre trigger: up to 50,000 values per input
1 Analog current input A on 4-mm safety sockets (alternatively to voltage input A)
Measuring ranges: ± 0.03/0.1/0.3/1/3 A
Measurement error: voltage error plus 1 %
Input resistance: < 0.5 Ω
Scanning rate: up to 1 MHz per input
See voltage inputs for further data
2 Analog inputs at sensor box connector sites A and B
(All CASSY sensor boxes and sensors can be connected)
Measuring ranges: ± 0.003/0.01/0.03/0.1/0.3/1 V
Input resistance: 10 kΩ
Scanning rate: up to 500 kHz per input
See voltage inputs for further data
The technical data will change depending on a connected sensor box. In this case CASSY Lab 2 automatically detects the possible measurement quantities and ranges when a sensor box is attached.
4 Timer inputs with 32-bit counters at sensor box sites A and B (e.g. for BMW box, GM box or timer box)
Counting frequency: max. 1 MHz
Time resolution: 20 ns
1 Changeover relay (switching indication via LED)
Range: max. 250 V / 2 A
1 Analog output (LED switching state indicator, e.g. for holding magnet or supplying experiment)
Variable voltage range: max. 16 V / 200 mA
(load ≥ 80 Ω)
12 Digital inputs (TTL) on sensor box sites A and B (at present only used for automatic sensor box detection)
6 Digital outputs (TTL) on sensor box sites A and B (at present only used for automatic switching of a sensor box measuring range)
1 USB-port for connection to a computer

Scope of supply:
1 Sensor-CASSY 2
1 USB cable

Width: 63 PU

MSI	CASSY Lab 2 (en, V2.27) Free demo version, full version requires a licence code of CASSY Lab 2
MSI	CASSY Lab 2 (fr, V2.27) Free demo version, full version requires a licence code of CASSY Lab 2
MSI	CASSY Lab 2 (es, V2.27) Free demo version, full version requires a licence code of CASSY Lab 2
MSI	CASSY Lab 2 (pt, V2.27) Free demo version, full version requires a licence code of CASSY Lab 2
MSI	CASSY Lab 2 (it, V2.27) Free demo version, full version requires a licence code of CASSY Lab 2
MSI	CASSY Lab 2 (nl, V2.27) Free demo version, full version requires a licence code of CASSY Lab 2
MSI	CASSY Lab 2 (ru, V2.27) Free demo version, full version requires a licence code of CASSY Lab 2
MSI	CASSY Lab 2 (zh, V2.27) Free demo version, full version requires a licence code of CASSY Lab 2
Manual	CASSY Lab 2 Manual (en)
Manual	CASSY Lab 2 Manual (fr)
Manual	CASSY Lab 2 Manual (es)
Web Link	CASSY Lab 2 Web Help (en)
Web Link	CASSY Lab 2 Web Help (fr)
Web Link	CASSY Lab 2 Web Help (es)
ZIP	CASSY SDK for own software development (Windows/Linux)
ZIP	LabVIEW driver for LabVIEW 2017 or higher (Windows)
ZIP	MATLAB driver with examples (Windows)
Web Link	CASSY App (iOS) App Store
Web Link	CASSY App (Android) Google Play
Web Link	CASSY App (Windows 10) Microsoft Store

Sensor-CASSY, 3 HU

All technologies