Networking automotive systems: "SENT" gaspedal
A2.6.1.10
"SENT" stands for “single edge nibble transmission” and is an interface for fast data exchange between a sensor or actuator and a controller. Standardised under SAE J2716, SENT has been considered an alternative to classic analogue and PDM interfaces since 2007.
As an affordable high-speed alternative to the LIN bus, it is thus advancing to enter all vehicle classes.
LEYBOLD has developed a training system that involves two conventional sensors with a SENT interface. The signals can be practically examined using a time base diagram or also theoretically using a protocol analyser.
1 | 739 708 | Automotive sensors 2 |
1 | 739 709 | Position sensor w. SENT |
1 | 738 103 | Ignition start switch |
1 | 738 032 | Battery connection with protection circuit |
1 | 738 12 4 | Multi-purpose switch |
1 | 524 013 8 | ** Sensor-CASSY 2 |
1 | 739 589 4 | ** Software: Vehicle diagnosis |
1 | 524 013SKFZ | Sensor-CASSY 2 Starter, Automotive |
1 | 773 961 | ** CAN-Databus-Multi-Adapter |
1 | 739 580 8 | ** Databus detector |
1 | 738 02 | ** Automotive power supply 13.8 V/36 A |
2 | 500 59 8 | Safety bridging plugs, black, set of 10 |
1 | 500 601 4 | Safety connection lead, 10 cm, red |
1 | 500 641 8 | Safety experiment cable, 100 cm, red |
1 | 500 642 4 | Safety experiment cable, 100 cm, blue |
1 | 307 70 4 | ** Tubing 8 mm Ø, 1 m, plastic |
1 | 604 520 8 | ** Connector with nipple |
1 | 375 58 4 | ** Hand vacuum pump |
1 | 577 36 8 | ** Resistor, 220 Ω, STE 2/19 |
1 | 775 069DE 4 | LIT-print: CAN FD and SENT, German |
1 | 775 069EN 4 | LIT-print: CAN FD and SENT |
1 | 726 19 4 | Panel frame SL85, single-level |
1 | PC with operating system Windows 7/8/10/11 |