The experiments are carried out with industrially manufactured machines class 1 kW. The 1 kW machines have a higher efficiency because of the lower winding resistance and come closer to an ideal machine. All test machines have a special base for connection to the machine testing system 1.0. The machine testing system is used to record the characteristic curves of the test machines. The machines are supplied via a variable transformer or the mains.
Objectives
- Protective measures and electrical safety
- Setting up AC machines and putting them into operation
- Use of starting circuits
- Assessment of AC machine characteristics
Universal motors are a kind of commutator machine for both DC and AC operation. This is achieved by additional lamination of the iron in the stator. Universal motors can also be called single-phase series-wound motors. They are in widespread use, for example, in household appliances and machine tools.
Highlights:
- In order to protect against overheating, the stator windings of the test machines are equipped with temperature detectors.
- In case of overheating, the machine testing system switches off the load of the test machine, thus a preserved air cooling. This prevents damage to the testing machines.
- The test machines are equipped with an educationally designed terminal board with the winding configuration printed on it.
- The ends of all the windings are led out at the terminal board at safety sockets (4 mm).
- Computer-supported acquisition of measurement data provides for meaningful measurement results.
- The arrangement of the 4 mm safety sockets corresponds to the standards for industrial machines.
All functions of the Machine Test CASSY 1.0 can be operated quickly and directly via the display, the rotary wheel and the buttons on the unit. All settings and measurement results can be saved on the unit and quickly called up again later or simply downloaded.
In addition, the Machine Test CASSY 1.0 is fully controllable in real time via RJ45 Ethernet, W-LAN and USB-C interfaces.
These interfaces can be used by the following software:
- CASSY Lab 2 for drives and energy systems,
- MATLAB® and LabVIEW ™
- Lab Docs Editor Advanced
Several integrated servers are available in Machine Test CASSY 1.0 for the local media connection of at least four end devices simultaneously.
For more details, see product data 7732900 or 7731901 Machine Test CASSY 1.0
The individual equipment is equally suitable for student experiments in the laboratory with low voltage (230 / 400 V three-phase current) and - with a mobile trainer - for teacher demonstration in the classroom. The experiments are carried out according to the manual.
The target group is made up of commercial apprentices and students of electrical machine construction. The course offers experiments at an intermediate level and also allows for the necessary insight into machine behaviour for scientific interpretation at undergraduate level. The media connection makes the experiments suitable for demonstration in the classroom or a lecture hall.
In the following configurations there are further extended experiments with DC machines:
- E2.3.2.2 Universal motor DC
- E2.3.3.2 Capacitor motor
Topics
- Connection and operation of universal machines in a DC power supply network
- Reversing direction of rotation
- Measurement of efficiency
- Armature reaction and commutation
- Characteristics of motors
Similar to illustration
Main components:
| 1 | 773 270 | Universal motor, 1.0  |
| 1 | 733 53 4 | Motor protection switch, 4-6 |
Set-up for the machine test
| 1 | 745 563 | Power circuit breaker |
Machine test system 1 kW | 1 | 773 2900 | Machine Test CASSY, 1.0 |
| 1 | 524 222 | CASSY Lab 2 for Drives and Power Systems |
| 1 | 773 2990 | Electrical dynamometer, 1.0 |
| 1 | 773 258 4 | Coupling / shaft end guard, 1.0, transparent |
| 1 | 315 40 8 | Weight, 2 kg |
| 1 | 773 115 | Machine base bench, 120 cm |
| 1 | 732 56 4 | Coupling, 1.0 |
Manuals: | 1 | 775 230DE 4 | LIT-print: AC machines 1.0, German |
| 1 | 775 230EN 4 | * LIT-print: AC Machines 1.0 |
Power supply: | 1 | 726 85 8 | Adjustable transformer 0...260 V |
| 1 | 726 090 8 | Panel frame KH 160, two level |
| 1 | 500 59 8 | Safety bridging plugs, black, set of 10 |
| 1 | 500 591 4 | Safety bridging plugs, yellow/green, set of 10 |
| 1 | 500 855 4 | Safety experiment cables, 32 A, set of 34 |
| 1 | 500 856 4 | Safety experiment cables, 32 A, yellow/green, set of 5 |
Additionally required:
PC with Windows 7/8/10
The following material is available for mounting and conversion of machines with the B3 design and a 71 mm shaft level at LD. | 1 | 773 256 4 | Assembly set el. machine base 1.0 short |
| 1 | 773 257 4 | Assembly set el. machine base 1,0 long |
Articles marked with * are not essential, we do however recommend them to carry out the experiment.
