Basic Package S7-1512C-1 PN

E6.6.3.1

This course familiarises students with the most important functions of a programmable logic controller (PLC). The basic package for the Siemens PLC S7-1512C-1 PN contains only the assembly components and accessories. The PLC S7-1512C-1 PN is not included in this kit.

Attention:

This kit is designed for customers that already have a PLC S7-1512C-1 PN or for customers that want to buy the PLC S7-1512C-1 PN somewhere else.
The PLC S7-1512C-1 PN is not included in this kit.
If you want to buy a complete system consisting of Basic Package and PLC, then take a look a the following kit:
E6.6.3.11: Trainer Package S7-1512C-1 PN

Educational objectives

Operating the PLC
Creating programs
Learn logistics and control functions
Testing the programs
Set up the network connections for Profi-Net and Profi-Bus

The teaching packet consists of:

Base plate PLC

Description of the base plate PLC:

24 digital inputs, 16 of these with touch incremental switch and 16 digital outputs are directly accessible via the safety connector (4 mm).
32 digital inputs and 32 digital outputs are accessible via 27-pole plugs configured for MCS.
2 analogue input channels and 2 analogue output channels are accessible via safety connectors (4 mm).
A maximum of 8 analogue input channels and 4 analogue output channels are accessible on two 30-pole plugs, depending on the PLC.
Profi-Net is directly connected to the CPU.
The power supply is connected with the switch via a protected plug.
The power supply is designed for an output of 190 W at 120 V, 60 Hz and 230V, 50 Hz. The mains voltage is automatically recognised and switched.
The control voltage amounts to 24 v DC at max 8 A.

Method

Student experiments are carried out following the tasks set in the experiment description

Students completing vocational training in electrical engineering for a trade or industry are the target group addressed. The course is geared toward advanced learners. So prior knowledge is recommended:

Basics of safety switches
Programming of PLC
Instruction in the dangers of electrical technology

The following sets are recommended for further learning:

E6.5.2.1 a Contactor controls with modules, 24 V
E6.5.2.2 a Contactor control with experimental plates, 24 V
E6.5.2.5 Controlling with limit and proximity switches
E6.7.1.1 ASIMA for small controllers.
E6.7.2.1 MCS system 4 station control over PLC
E6.7.2.2 MCS system 6 stations control over PLC with Profi-Bus

Topics

Programming of a PLC
Programming method KOP, FUP, AWL, S7-GRAPH
Expanded program structure
Logic connections
Timer and clock timer functions
RS components
Counting and frequency measurement
Analogue value processing, set value and control

1	773 0701	Basic Panel Siemens
1	773 073 8	Assembly set PLC S7-1512
1	773 080	* HMI Touch Panel for PLC TP 1500 Comfort
1	726 10 4	* Panel frame T150, two-level
1	500 59 8	* Safety bridging plugs, black, set of 10
2	500 641 8	* Safety experiment cable, 100 cm, red
2	500 642 4	* Safety experiment cable, 100 cm, blue

PC with operating system Windows 7/8/10/11
1	773 050	* ASIMA Plant Simulator II
1	700 00CBT	* DVD: COM3LAB Software
1		A selection of 33 masks can be found in E6.7.1.3.
1	773 048	50-pole ribbon cable, 700 mm
1	773 04901 4	Mask M1 Logic basic functions
1	773 04902 4	Mask M2 Digital function modules
1	773 04903 4	Mask M3 Motor ON/OFF
1	773 04904 8	Mask M4 Reversing contactor
1	773 04905 4	Mask M5 Star-delta connection
1	773 04906 8	Mask M6 Reversing star-delta connection
1	773 04907 4	Mask M7 Pendulum table control
1	773 04908 4	Mask M8 Dahlaner circuit
1	773 04909 8	Mask M9 Motor with 2 windings
1	773 04910 4	Mask M10 Motor self-starter
1	773 04911 8	Mask M11 Conveyor belt system
1	773 04912 4	Mask M12 Reactive-current compensation
1	773 04913 4	Mask M13 Heating control
1	773 04914 4	Mask M14 Running light
1	773 04915 8	Mask M15 Automatic filling System
1	773 04916 4	Mask M16 Tank system
1	773 04917 4	Mask M17 Coal grinder
1	773 04918 4	Mask M18 Embossing machine
1	773 04919 8	Mask M19 Fan control
1	773 04920 4	Mask M20 Traffic light for road works
1	773 04921 4	Mask M21 traffic lights
1	773 04922 4	Mask M22 Collecting belt conveyor
1	773 04923 4	Mask M23 Conveyor charging system
1	773 04940 4	Mask M40 Silo control
1	773 04941 4	Mask M41 Reactor
1	773 04942 4	Mask M42 Goods lift
1	773 04943 4	Mask M43 Pump control
1	773 04944 4	Mask M44 Dirty-water pump system
1	773 04945 8	Mask M45 Monitoring of 3 pumps
1	773 04946 4	Mask M46 Pump system (pressure)
1	773 04947 4	Mask M47 Drinks machine
1	773 04948 4	Mask M48 Mixer
1	773 04949 4	Mask M49 Sequence control
3	8-2600001-000-10-0 4	Transparent folder, 410 mm x 320 mm x 10 mm
1	775 790DE 4	LIT-print: ASIMA, German
1	775 790EN 4	LIT-print: ASIMA
1		additionally required: 1 PC with Windows 7 / 8.1 / 10 (x86 or x64)

Articles marked with * are not essential, we do however recommend them to carry out the experiment.

Basic Package S7-1512C-1 PN

All technologies